The LED strips can be cut shorter without affecting the lights. My main goal would be aimed at the battery pack and if the motion sensor i3 in that. I had watched the video you speak of for the HO scale Lighting. Awesome, I didn't notice that Train Tech also made the strips for the N scale. More ideas are floating in, must look into them also. They look to be the same price. Just discovered this video for the N Scale Light Strips. Thanks DalaGStanator.
Upon further investigation the N Scale strip has the same number of LED Lights but they are closer together but use a smaller 3 volt coin battery. I am guessing but it probably wouldn't last as long as the CR2032 coin battery used in the HO Scale strip but the advantage would be it doesn't take up any room as its placement on the strip is between two lights and not at the end. Has anyone an idea as to comparing the life expectancy of the CR2032 vs the CR1225 battery?
Upon further investigation the N Scale strip has the same number of LED Lights but they are closer together but use a smaller 3 volt coin battery. I am guessing but it probably wouldn't last as long as the CR2032 coin battery used in the HO Scale strip but the advantage would be it doesn't take up any room as its placement on the strip is between two lights and not at the end. Has anyone an idea as to comparing the life expectancy of the CR2032 vs the CR1225 battery?
![[Image: super-smiley-emoticon.gif]](http://www.sherv.net/cm/emo/word/super-smiley-emoticon.gif)
![[-]](https://www.blueplastictracks.org/images/collapse.png)