Please let me know how that goes, Super.
Regarding going over acrylic with enamel, so long as the acrylic layer is dry it should be safe to do so. I did on my Spitfire. Spraying Acrylic over Enamel is usually a bad mix though and will ruin everything. :/ I found that out on a Tomy Gordon shell, so no great loss there!
What is your experience with Vallejo? They seem to be one of the main paint brands for modellers among Tamiya, Humbrol, Revell and Mr. Hobby but again I haven't used them and wouldn't know if it's worth stocking up on some shades?
On the last page I posted a not so great image of the Rebuilt Bulleid kit project and tonight, after gluing the last few pieces on save for the nameplate backing plates, I took some better pictures.
![[Image: 1b812c73df.png]](https://puu.sh/ClCtC/1b812c73df.png)
![[Image: 37db67d9f1.png]](https://puu.sh/ClCvM/37db67d9f1.png)
And I felt like doing something a little bit different so we ended up with images like these
![[Image: d9cb5200b8.png]](https://puu.sh/ClCwk/d9cb5200b8.png)
![[Image: 06cc5415fb.png]](http://puu.sh/ClD0n/06cc5415fb.png)
- Tree
Regarding going over acrylic with enamel, so long as the acrylic layer is dry it should be safe to do so. I did on my Spitfire. Spraying Acrylic over Enamel is usually a bad mix though and will ruin everything. :/ I found that out on a Tomy Gordon shell, so no great loss there!
What is your experience with Vallejo? They seem to be one of the main paint brands for modellers among Tamiya, Humbrol, Revell and Mr. Hobby but again I haven't used them and wouldn't know if it's worth stocking up on some shades?
On the last page I posted a not so great image of the Rebuilt Bulleid kit project and tonight, after gluing the last few pieces on save for the nameplate backing plates, I took some better pictures.
And I felt like doing something a little bit different so we ended up with images like these
- Tree
![[-]](https://www.blueplastictracks.org/images/collapse.png)