(02-28-2017, 02:08 AM)Super Wrote: Thats Ripleys thread on the gears and I believe he made all the tooling. Yes indeed. Very simple to do, and would likely not even need to do that much. You could get by with just using some sand paper and sanding the gear down. If you get the 5mm gear then it is only about 1mm that you need to remove. 
Also I accidentally put a small magnet from a screwdriver of mine and poked his speaker, can that be fixed too.
Here's what I am talking about: https://youtu.be/IyOIAg3uctA
Making Customs, Filming Videos and looking for the purest engines. That's how I roll here on Blue Plastic Tracks.
(This post was last modified: 03-17-2017, 02:35 AM by Trainboy90 Productions.)
Twitter: https://twitter.com/TB90Prod2 |
